| Open Care System Tiana |
Your are here  sstechnomed.com Home Infant Care Radiant warmer Tiana Open Care System Tiana |
|
| Microprocessor Controlled |
- The digital, microprocessor-based controller comes standard with a full spectrum of features.
- The Tiana Open care System comes complete with automatic manual and baby (Servo) modes.
- Two function control models provide the clinician more flexibility while optimizing the thermal environment.
- Skin temperature display is larger then other set temperature display
- Skin temperature display can be converted from °C to °F by the push of a buttom.
- A full complement of alarm provides safety and convenience, with both audible and visual indicators in the event of:
|
 |
- High Temp. / Low Temp.
- Set High / Set Low
- Probe Failure
- Power Failure
- The system automatically starts the heating from 40% in manual mode and the same can be changed through settings upto 99%.
- The High & Low temp. alarm settings can be adjusted according to the patient condition.
- The Radiant Warmer features an independent ambient temperature probe which maximizes the heating efficiency across the range of operating temperature.
- A big LCD is provided for more specific information & visualization of the heater power in manual and servo modes.
- The system automatically converts from servo mode to manual mode in case of probe failure thus providing non stop working of the unit.
- The spacious baby bed incorporates easily drop down sided for maximum access to the patient.
|
| Heater Assembly: |
| The heater assembly located above the center of the support structure consists of an integral examination light and a 650 Watts heating system for quick warming and even distribution of heat on the baby bed. |
| The First Breath: |
- The open care system combines virtually all the technologies, which a caregiver may need for resuscitation.
- The neonate can be supplied with a constant oxygen flow through the oxygen humidifier when connected to an oxygen cylinder (optional).
- The motorized slow suction can be used with a simple flip of a switch
- A digital apgar timer is standard, which signals when 1, 5 and 10 minutes have collapsed.
|
| Technical Specification |
| Height |
1924mm |
| Length |
884mm |
| Width |
858mm |
|
| Electrical Specification |
| Power supply |
200V/50Htz |
| Heater Power |
650Watts |
| Fuse |
5 Amp |
| IEC |
COMPLIANT |
|
|
|
|
